Print
MIC23603

MIC23603: 4MHz PWM 6A Buck Regulator with HyperLight Load®

Key Features
  • Input voltage: 2.7V to 5.5V
  • 6A output current
  • Up to 93% efficiency and 81% at 1mA
  • 24µA typical quiescent current
  • 4MHz PWM operation in continuous mode
  • Ultra-fast transient response
  • Power Good
  • Programmable soft-start
  • Low voltage output ripple
    • 14mVpp ripple in HyperLight Load® mode
    • 5mV output voltage ripple in full PWM mode
  • Fully integrated MOSFET switches
  • 0.01μA shutdown current
  • Thermal shutdown and current limit protection
  • Output voltage as low as 0.65V
  • 20-pin 4mm x 5mm DFN
  • -40°C to +125°C junction temperature range
Typical Application



Enlarge View

Related Information

Data Sheet
Product Brief
Eval Boards or Kit
Software Package / Kit
Application Notes
Package Outlines
MICRELSim Center
SPICE / IBIS Models
Distributor Stock Check
Free Samples
Press Releases
Related Literature
Applications
  • 5V POL supplies
  • µC/µP, FPGA, and DSP power
  • Test and measurement systems
  • Barcode readers
  • Set-top boxes, modems, and DTV
  • Distributed power systems
  • Networking systems


General Description

The MIC23603 is a high-efficiency 4MHz 6A synchronous buck regulator with HyperLight Load® mode. HyperLight Load® provides very high efficiency at light loads and ultrafast transient response which is perfectly suited for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors. The tiny 4mm x 5mm DFN package saves precious board space and requires few external components.

The MIC23603 is designed for use with a very small inductor, down to 0.33μH, and an output capacitor as small as 47μF that enables a sub-1mm height.

The MIC23603 has a very low quiescent current of 24μA and achieves as high as 81% efficiency at 1mA. At higher loads, the MIC23603 provides a constant switching frequency around 4MHz while achieving peak efficiencies up to 93%.

The MIC23603 is available in 20-pin 4mm x 5mm DFN package with an operating junction temperature range from –40°C to +125°C.

Ordering Information
Part Number Temperature Range Package
MIC23603YML -40°C to +125°C 20-Pin 4mm x 5mm DFN

DFN is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.

To view the Portable Document Format files (PDFs) on this site, download a free Acrobat Reader. The free Adobe Acrobat Reader allows you to view, navigate and print PDF files across many different platforms. If you wish to download a copy of the free Adobe Acrobat Reader please click on the