Print
MIC23303

MIC23303: 4MHz PWM 3A Buck Regulator with HyperLight Load® and Power Good

Key Features
  • Input voltage: 2.7V to 5.5V
  • Output voltage: down to 0.65V
  • Up to 3A output current
  • Up to 93% peak efficiency
  • 80% typical efficiency at 1mA
  • Power Good output
  • Programmable soft-start
  • 24μA typical quiescent current
  • 4MHz PWM operation in continuous mode
  • Ultra fast transient response
  • Low ripple output voltage
    • 35mVpp ripple in HyperLight Load® mode
    • 5mV output voltage ripple in full PWM mode
  • Fully integrated MOSFET switches
  • 0.01µA shutdown current
  • Thermal-shutdown and current-limit protection
  • 12-pin 3mm x 3mm DFN
  • –40°C to +125°C junction temperature range
Typical Application



Enlarge View

Related Information

Data Sheet
Product Brief
Eval Boards or Kit
Software Package / Kit
Application Notes
Package Outlines
MICRELSim Center
SPICE / IBIS Models
Distributor Stock Check
Free Samples
Press Releases
Related Literature
Applications
  • Portable media/MP3 players
  • Portable navigation devices (GPS)
  • WiFi/WiMax/WiBro modules
  • Digital cameras
  • Wireless LAN cards
  • Portable applications


General Description

The MIC23303 is a high efficiency 4MHz 3A synchronous buck regulator with HyperLight Load® mode, Power Good output indicator, and programmable soft-start. HyperLight Load® provides very high efficiency at light loads and ultra-fast transient response which makes the MIC23303 perfectly suited for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors. The tiny 3mm x 3mm DFN package saves precious board space and requires only six external components.

The MIC23303 is designed for use with a very small inductor, down to 0.33µH, and an output capacitor as small as 10µF that enables a total solution size, less than 1mm in height.

The MIC23303 has a very low quiescent current of 24µA and can achieve a peak efficiency of 93% in continuous conduction mode. In discontinuous conduction mode, the MIC23303 can achieve 80% efficiency at 1mA.

The MIC23303 is available in 12-pin 3mm x 3mm DFN package with an operating junction temperature range from –40°C to +125°C.

Ordering Information
Part Number Temperature Range Package
MIC23303YML -40°C to +125°C 12-Pin 3mm x 3mm DFN(1,2)


1. DFN is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.
2. DFN Pin 1 identifier is ● .

To view the Portable Document Format files (PDFs) on this site, download a free Acrobat Reader. The free Adobe Acrobat Reader allows you to view, navigate and print PDF files across many different platforms. If you wish to download a copy of the free Adobe Acrobat Reader please click on the