Print
MIC23451

MIC23451: 3MHz, 2A Triple Synchronous Buck Regulator with HyperLight Load® and Power Good

Key Features
  • Input voltage: 2.7V to 5.5V
  • Three independent 2A outputs
  • Up to 93% peak efficiency
  • 81% typical efficiency at 1mA
  • Three independent Power Good Indicators
  • 24µA typical quiescent current (per channel)
  • 3MHz PWM operation in continuous mode
  • Ultra-fast transient response
  • Low voltage output ripple
    • 30mVpp ripple in HyperLight Load® mode
    • 5mV output voltage ripple in full PWM mode
  • Fully integrated MOSFET switches
  • 0.1µA shutdown current
  • Thermal shutdown and current limit protection
  • Output voltage as low as 1.0V
  • 26-pin 4mm x 4mm QFN package
  • Junction temperature range of –40°C to +125°C
Typical Application



Enlarge View

Related Information

Data Sheet
Product Brief
Eval Boards or Kit
Software Package / Kit
Application Notes
Package Outlines
MICRELSim Center
SPICE / IBIS Models
Distributor Stock Check
Free Samples
Press Releases
Related Literature
Applications
  • Solid state drives (SSD)
  • µC/µP, FPGA, and DSP power
  • Test and measurement systems
  • Set-top boxes and DTV
  • High-performance servers
  • Security/surveillance cameras
  • 5V POL applications


General Description

The MIC23451 is a high-efficiency, 3MHz, triple 2A, synchronous buck regulator with HyperLight Load® mode. HyperLight Load provides very-high efficiency at light loads and ultra-fast transient response, which is ideal for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors. The 4mm x 4mm QFN package saves board space and requires only five external components for each channel.

The MIC23451 is designed for use with a very small inductor, down to 0.47µH, and an output capacitor as small as 2.2µF that enables a total solution size that is less than 1mm height.

The MIC23451 has a very-low quiescent current of 24µA each channel and achieves as high as 81% efficiency at 1mA. At higher loads, the MIC23451 provides a constant switching frequency around 3MHz while achieving peak efficiencies up to 93%.

The MIC23451 is available in a 26-pin 4mm x 4mm QFN package with an operating junction temperature range from –40°C to +125°C.

Ordering Information
Part Number Junction Temperature Range(1) Package(2,3)
MIC23451-AAAYFL -40°C to +125°C 26-Pin 4mm x 4mm QFN

Notes:
1. Other options available. Contact Micrel for details.
2. QFN is a Green, RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.
3. QFN • = Pin 1 identifier.

To view the Portable Document Format files (PDFs) on this site, download a free Acrobat Reader. The free Adobe Acrobat Reader allows you to view, navigate and print PDF files across many different platforms. If you wish to download a copy of the free Adobe Acrobat Reader please click on the