|
MIC2225
|
 |
600 |
300 |
2.7 |
5.5 |
Down to 1.0V |
Down to 0.8V |
|
|
Digital Power Management IC, 2MHz DC/DC converter with LDO and independent enable, >95% efficiency. |
2x2* |
|
MIC23060
|
|
600 |
300 |
2.7 |
5.5 |
1.8V/3.3V |
1.2V |
X |
|
4MHz 600mA DC/DC Regulator and 300mA LDO Regulator with flexible sequencing feature. DC/DC features HyperLight Load™. >95% efficiency. |
2.5x2.5* |
|
MIC2800
|
|
600 |
300 |
2.7 |
5.5 |
1.8V/3.3V |
LDO1: 0.8V to (VDC/DC-VDD)
LDO2: 0.8V to 3.6V |
|
X |
Digital Power Management IC, 2MHz DC/DC converter with two Linear Regulators. LDO1 is directly connected to the output of the DC/DC converter. POR/Power Good pin and LOWQ mode. |
3x3 |
|
MIC2807
|
|
600 |
200 |
2.7 |
5.5 |
DAC cntrl, 0.3V to Vin |
2.85V/2.85V |
|
|
RF Power Management IC, 600mA DC/DC converter with DAC controlled output to power amplifier. 200mA RF LDO output current (provides bias voltage supply for PA), 30mA PA LDO (provides highly accurate PA reference voltage). |
2.5x2.8 |
|
MIC2808
|
|
600 |
200 |
2.7 |
5.5 |
DAC cntrl, 0.3V to Vin |
2.85V/2.85V |
|
|
RF Power Management IC, 600mA DC/DC converter with DAC controlled output to power amplifier. 200mA RF LDO output. Reduced package size and LDO dropout compared to MIC2807. |
2x2.5* |
|
MIC2810
|
|
600 |
300 |
2.7 |
5.5 |
1.0V/2.0V |
0.8V to 3.6V |
|
X |
Digital Power Management IC, 2MHz with two Linear Regulators. LDO1 has a separate VIN pin and can either post-regulate the DC/DC converter or be connect directly to the main input supply. POR/Power Good pin. |
3x3 |
|
MIC2811
|
|
600 |
300 |
2.7 |
5.5 |
1.0V/2.0V |
LDO1, 2: 0.8V to 3.6V
LDO3: 1.0V to 3.9V |
|
|
Digital Power Management IC, 2MHz DC/DC converter with 3 LDOs. Bypass cap for improved noise performance on LDO1 and LDO2. LDO1 and LDO2 have separate VIN pins. Separate enable pins. |
3x3 |
|
MIC2821
|
|
600 |
300 |
2.7 |
5.5 |
1.0V/2.0V |
LDO1, 2: 0.8V to 3.6V
LDO3: 1.0V to 3.9V |
|
|
Digital Power Management IC, 2MHz DC/DC converter with 3 LDOs. LDO1 and 2 have separate VIN pins. Independent enable for all four regulators. |
3x3 |
|
MIC2826
|
|
500 |
150 |
2.7 |
5.5 |
I2C and Dynamic Scaling from 0.8V to 1.8V |
I2C and Dynamic Scaling from 0.8V to 3.3V |
X |
|
4MHz DC/DC HyperLight Load™ converter with 1.8V to DVIN Adj. via I2C & Dynamic Voltage Scaling 3 LDOs. Fast-mode (400kHz) I2C Control for Startup, Enables and Output Voltages. Optional Default Startup Sequence and Voltages. Fault Monitoring Flag (IRQb). |
2.5x2.5* |
|
MIC2827
|
|
500 |
150 |
2.7 |
5.5 |
I2C and Dynamic Scaling from 0.8V to 1.8V |
I2C and Dynamic Scaling from 0.8V to 3.3V |
X |
|
4MHz DC/DC HyperLight Load™ converter with Dynamic Voltage Scaling and 2 LDOs. Fast-mode (400kHz) I2C Control for Startup, Enables and Output Voltages. Optional Default Startup Sequence and Voltages. Fault Monitoring Flag (IRQb). |
2.5x2.5* |
|
MIC2829
|
|
1000 |
11 |
2.7 |
5.5 |
DC/DCs: 0.8V to 1.8V |
0.8V to 3.3V |
|
|
Highly integrated PMIC for 3G/4G wireless data and portable applications. 6 buck regulators, 5 general purpose LDOs, 6 low noise regulators, SIM card level shifter, and PGOOD indicator with adjustable delay. |
LGA-76, FBGA-85 (5.5x5.5) |
PRODUCTS 
