Search By Keyword

Search By Part Number
Parametric Search List of All Parts  
 
Homepage > Products > Micrel Operational Amplifiers Micrel Operational Amplifiers
Operational Amplifiers (Op Amps)

MIC86x Product Page
Operational Amplifiers Selection Guide
Web-based Operational Amplifier Selection Guide

Single Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Single: SC70-5
MIC860 Micro-Power RRO 33µA 2.43V to 5.25V 20mV 20pA 4MHz 3V/µs 15mA CMOS
MIC861 Micro-Power RRO 4.6µA 2.43V to 5.25V 10mV 20pA 350kHz 0.12V/µs 10mA CMOS
MIC918 High-Speed - 550µA ±2.5V to ±9V 5mV 0.25µA 51MHz 1500V/µs 30mA Bipolar
MIC919 High-Speed - 360µA ±2.5V to ±9V 5mV 0.13µA 27MHz 1500V/µs 25mA Bipolar
MIC920 High-Speed - 550µA ±2.5V to ±9V 5mV 0.26µA 80MHz 3000V/µs 30mA Bipolar
MIC921 High-Speed - 360µA ±2.5V to ±9V 5mV 0.13µA 45MHz 3200V/µs 25mA Bipolar
MIC922 High-Speed - 2.5mA ±2.5V to ±9V 5mV 1.7µA 230MHz 1500V/µs 40mA Bipolar
MIC923 High-Speed - 2.5mA ±2.5V to ±9V 5mV 1.7µA 410MHz 2200V/µs 40mA Bipolar
Single: SOT23-5
LMC7101A General-Purpose RRIO 500µA 2.7V to 10V 6mV 1.0pA 500kHz 0.5V/µs 80mA CMOS
LMC7101B General-Purpose RRIO 500µA 2.7V to 10V 9mV 1.0pA 500kHz 0.5V/µs 80mA CMOS
MIC6211 High-Voltage - 1.2mA 4.0V to 32V 7mV 50nA 2.5MHz 6.0V/µs 20mA Bipolar
MIC7111 Micro-Power RRIO 20µA 1.8V to 11V 7mV 1.0pA 25kHz 20mV/µs 100mA Bipolar
MIC7300 General-Purpose RRIO 700µA 2.2V to 10V 9mV 0.5pA 500kHz 0.5V/µs 85mA Bipolar
MIC910 (4)
 High-Speed - 2.4mA ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA Bipolar
MIC911 (4)
 High-Speed - 1.2mA ±2.5V to ±9V 10mV 1.5µA 105MHz 120V/µs 25mA Bipolar
High-Speed - 2.4mA ±2.5V to ±9V 15mV 3.5µA 200MHz 360V/µs 25mA Bipolar
High-Speed - 4.2mA ±2.5V to ±9V 16mV 5.5µA 350MHz 500V/µs 25mA CMOS
MIC914 (5)
 High-Speed - 1.2mA ±2.5V to ±9V 10mV 1.5µA 160MHz 160V/µs 25mA Bipolar

Dual Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Dual: SOT23-8
MIC862 Micro-Power RRO 31µA 2V to 5.25V 6mV 10pA 3 MHz 2V/µs 17mA CMOS
MIC863 Micro-Power RRO 4.2µA 2V to 5.25V 6mV 10pA 450 kHz 0.35V/µs 17mA CMOS
Dual: MSOP-8
MIC7122 General-Purpose RRIO 350µA/amp 2.2V to 15V 9mV 1pA 750kHz 0.7V/µs 40mA CMOS
Dual: MSOP-10
MIC915 (4)
 High-Speed - 2.4mA/amp ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA CMOS

Triple Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Triple: QSOP-16
MIC916 (4) High-Speed - 2.4mA /amp ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA CMOS

Note 1 Maximum at 25ºC
Note 2 GBW = gain bandwidth product
Note 3 Continuous short circuit may exceed absolute devices junction temperature under some conditions.
Note 4 MIC910/911/915/916 is fully compensated and stable with any load capacitance.
Note 5 MIC912/914 is decompensated and requires attention to loading but is still unity gain stable. Must have either a minimum load resistance of 200-ohms or greater than a 10pF load capacitor.
Note 6 RRIO means that the opamp’s input common-mode range includes ground and extends 300mV beyond the supply rails. Also, that the output swings to within 200mV or better to either the supply rails.
Note 7 RRO means that the output swings to within 200mV or better to either the supply rails.
   Contact Us  Privacy  Terms of Use  Feedback  Login
Copyright 2010 Micrel, Inc. All Rights Reserved