Homepage > Products > Micrel Operational Amplifiers Micrel Operational Amplifiers
Operational Amplifiers (Op Amps)

MIC86x Product Page
Operational Amplifiers Selection Guide
Web-based Operational Amplifier Selection Guide

Single Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Single: SC70-5
MIC860 Micro-Power RRO 33µA 2.43V to 5.25V 20mV 20pA 4MHz 3V/µs 15mA CMOS
MIC861 Micro-Power RRO 4.6µA 2.43V to 5.25V 10mV 20pA 350kHz 0.12V/µs 10mA CMOS
MIC918 High-Speed - 550µA ±2.5V to ±9V 5mV 0.25µA 51MHz 1500V/µs 30mA Bipolar
MIC919 High-Speed - 360µA ±2.5V to ±9V 5mV 0.13µA 27MHz 1500V/µs 25mA Bipolar
MIC920 High-Speed - 550µA ±2.5V to ±9V 5mV 0.26µA 80MHz 3000V/µs 30mA Bipolar
MIC921 High-Speed - 360µA ±2.5V to ±9V 5mV 0.13µA 45MHz 3200V/µs 25mA Bipolar
MIC922 High-Speed - 2.5mA ±2.5V to ±9V 5mV 1.7µA 230MHz 1500V/µs 40mA Bipolar
MIC923 High-Speed - 2.5mA ±2.5V to ±9V 5mV 1.7µA 410MHz 2200V/µs 40mA Bipolar
Single: SOT23-5
LMC7101A General-Purpose RRIO 500µA 2.7V to 10V 6mV 1.0pA 500kHz 0.5V/µs 80mA CMOS
LMC7101B General-Purpose RRIO 500µA 2.7V to 10V 9mV 1.0pA 500kHz 0.5V/µs 80mA CMOS
MIC6211 High-Voltage - 1.2mA 4.0V to 32V 7mV 50nA 2.5MHz 6.0V/µs 20mA Bipolar
MIC7111 Micro-Power RRIO 20µA 1.8V to 11V 7mV 1.0pA 25kHz 20mV/µs 100mA Bipolar
MIC7300 General-Purpose RRIO 700µA 2.2V to 10V 9mV 0.5pA 500kHz 0.5V/µs 85mA Bipolar
MIC910 (4)
 High-Speed - 2.4mA ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA Bipolar
MIC911 (4)
 High-Speed - 1.2mA ±2.5V to ±9V 10mV 1.5µA 105MHz 120V/µs 25mA Bipolar
High-Speed - 2.4mA ±2.5V to ±9V 15mV 3.5µA 200MHz 360V/µs 25mA Bipolar
High-Speed - 4.2mA ±2.5V to ±9V 16mV 5.5µA 350MHz 500V/µs 25mA CMOS
MIC914 (5)
 High-Speed - 1.2mA ±2.5V to ±9V 10mV 1.5µA 160MHz 160V/µs 25mA Bipolar

Dual Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Dual: SOT23-8
MIC862 Micro-Power RRO 31µA 2V to 5.25V 6mV 10pA 3 MHz 2V/µs 17mA CMOS
MIC863 Micro-Power RRO 4.2µA 2V to 5.25V 6mV 10pA 450 kHz 0.35V/µs 17mA CMOS
Dual: MSOP-8
MIC7122 General-Purpose RRIO 350µA/amp 2.2V to 15V 9mV 1pA 750kHz 0.7V/µs 40mA CMOS
Dual: MSOP-10
MIC915 (4)
 High-Speed - 2.4mA/amp ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA CMOS

Triple Operational Amplifier Data Sheets
Part Number Feature Rail-to-Rail ISupply
(Typ)		 VSupply VOS
(MAX)(1)		 IBias
(Typ)		 GBW
(Typ)(2)		 Slew Rate
(Typ)		 Output
Current
(Min)(3)		 Type
Triple: QSOP-16
MIC916 (4) High-Speed - 2.4mA /amp ±2.5V to ±9V 15mV 3.5µA 135MHz 270V/µs 25mA CMOS

Note 1 Maximum at 25ºC
Note 2 GBW = gain bandwidth product
Note 3 Continuous short circuit may exceed absolute devices junction temperature under some conditions.
Note 4 MIC910/911/915/916 is fully compensated and stable with any load capacitance.
Note 5 MIC912/914 is decompensated and requires attention to loading but is still unity gain stable. Must have either a minimum load resistance of 200-ohms or greater than a 10pF load capacitor.
Note 6 RRIO means that the opamp’s input common-mode range includes ground and extends 300mV beyond the supply rails. Also, that the output swings to within 200mV or better to either the supply rails.
Note 7 RRO means that the output swings to within 200mV or better to either the supply rails.