Print
KSZ8795CLX

Integrated 5-Port, 10/100 Managed Ethernet Switch with Gigabit GMII/RGMII and MII/RMII Interfaces

Key Features
  • Integrated 5-port 10/100 Layer-2 switch with Gigabit uplink
    • New generation switch with four MACs, one GMAC (for uplink) and four PHYs that are fully compliant with the IEEE 802.3u standard
    • 10/100Base-T/TX switch system which combines a switch engine, frame buffer management, address lookup table, queue management, MIB counters, MAC, and PHY transceivers
    • Rapid spanning tree support (RSTP) for topology management
    • Micrel LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
  • Advanced Switch Capabilities
    • IEEE 802.1q VLAN support for up to 128 active VLAN groups (full range 4096 of VLAN IDs)
    • Support 802.1x port-based security and MAC-based authentication via access control lists (ACL)
  • QoS/CoS Packet Prioritization Support
    • 802.1p, DiffServ-based and Re-mapping of 802.1p priority field, per-port basis on four priority levels
    • 4 priority queues with dynamic mapping for IEEE 802.1P, IPV4 ToS (DiffServ), IPV6 Traffic Class, etc
    • Programmable rate limiting at the ingress and egress ports on a per port basis
  • Comprehensive Configuration Register Access
    • High-speed SPI (4-wire, up to 50MHz) interface to access all internal registers
    • MII management (MIIM, MDC/MDIO 2 wire) interface to access all PHY registers per IEEE 802.3 specification
    • Control registers configurable on-the-fly
  • Switch Monitoring Features
    • Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII
    • MIB counters for fully-compliant statistics gathering (36 MIB counters per port)
  • Low Power Dissipation
    • Full-chip software power-down
    • Energy detect power-down (EDPD)
    • Support IEEE P802.3az Energy Efficient Ethernet (EEE)
    • Wake on LAN (WoL) support
Typical Application



Enlarge View

Related Information

Data Sheet
Product Brief
Eval Boards or Kit
Software Package/Kit
Application Notes
Package Outlines
MICRELSim Center
SPICE / IBIS Models
Distributor Stock Check
Free Samples
Press Releases
Related Literature
Applications
  • Industrial Ethernet applications that employ IEEE 802.3-compliant MACs (Ethernet/IP, Profinet, MODBUS TCP, etc.)
  • VoIP phone
  • Set-top/game box
  • Automotive
  • Industrial control
  • IPTV POF
  • SOHO residential gateway with full wire speed of four LAN ports
  • Broadband gateway/firewall/VPN
  • Integrated DSL/cable modem
  • Wireless LAN access point + gateway
  • Standalone 10/100 switch
  • Networked measurement and control systems


General Description

The KSZ8795CLX is a highly-integrated, Layer 2-managed, 5-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring four 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8795CLX incorporates a small package outline, lowest power consumption with internal biasing, and on-chip termination. Its extensive features set includes enhanced power management, programmable rate limiting and priority ratio, tagged and port-based VLAN, port-based security and ACL rule-based packet filtering technology, quality-of-service (QoS) priority with four queues, management interfaces, enhanced MIB counters, high-performance memory bandwidth, and a shared memory-based switch fabric with non-blocking support. The KSZ8795CLX provides support for multiple CPU data interfaces to effectively address both current and emerging fast Ethernet and Gigabit Ethernet applications where the port 5 GMAC can be configured to any of GMII, RGMII, MII and RMII modes.

The KSZ8795CLX product is built upon Micrel’s industry-leading Ethernet latest analog and digital technology, with features designed to offload host processing and streamline your overall design.

  • Four integrated 10/100Base-T/TX MAC/PHYs
  • One integrated 10/100/1000Base-T/TX GMAC with selectable GMII, RGMII, MII, and RMII interfaces
  • Small 80-pin LQFP package
  • A robust assortment of power-management features including energy-efficient Ethernet (EEE), PME, and wake-on-LAN (WoL) have been designed-in to satisfy energy-efficient environments.

    All registers in the MAC and PHY units can be managed through the SPI interface. MIIM PHY registers can be accessed through the MDC/MDIO interface.

    Ordering Information
    Part Number Temperature Range Package Lead Finish/Grade
    KSZ8795CLXCC 0°C to +70°C 80-Pin LQFP Pb-Free/Commercial
    KSZ8795CLXIC -40°C to +85°C 80-Pin LQFP Pb-Free/Industrial
    KSZ8795CLX-EVAL 4 Copper Ports + Port 5 GMII/RGMII/MII/RMII Interface
    KSZ8795CLXD-EVAL 4 Copper Ports + KSZ9031RNX GPHY on Port 5 or Port 5 GMII/RGMII/MII/RMII Interface

    To view the Portable Document Format files (PDFs) on this site, download a free Acrobat Reader. The free Adobe Acrobat Reader allows you to view, navigate and print PDF files across many different platforms. If you wish to download a copy of the free Adobe Acrobat Reader please click on the