Print
MIC28304-1

MIC28304-1: 70V 3A Power Module Hyper Speed Control™ Family

Key Features
  • Easy to use
    • Stable with low-ESR ceramic output capacitor
    • No compensation and no inductor to choose
  • 4.5V to 70V input voltage
  • HyperLight Load® Control (MIC28304-1)
  • Hyper Speed Control™ (MIC28304-2)
  • Single-supply operation
  • Power Good (PG) output
  • Hiccup mode current limit
  • Low radiated emission (EMI) per EN55022, class B
  • 5ms internal soft-start, internal compensation, and thermal shutdown
  • Adjustable current limit
  • 0.8V Reference voltage with ±1% accuracy
  • Adjustable output voltage from 0.8V to 24V (also limited by duty cycle)
  • 200kHz to 600kHz, programmable switching frequency
  • Supports safe start-up into a pre-biased output
  • –40°C to +125°C junction temperature range
  • Available in 64-pin, 12mm × 12mm × 3.5mm QFN package
Typical Application



Enlarge View

Related Information

Data Sheet
Product Brief
Eval Boards or Kit
Software Package / Kit
Application Notes
Package Outlines
MICRELSim Center
SPICE / IBIS Models
Distributor Stock Check
Free Samples
Press Release
Related Literature
Applications
  • Distributed power systems
  • Industrial, medical, telecom and automotive


General Description

Micrel’s MIC28304 is synchronous step-down regulator module, featuring a unique adaptive ON-time control architecture. The module incorporates a DC-to-DC controller, power MOSFETs, bootstrap diode, bootstrap capacitor and an inductor in a single package. The MIC28304 operates over an input supply range from 4.5V to 70V and can be used to supply up to 3A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%. The device operates with programmable switching frequency from 200kHz to 600kHz.

Micrel’s HyperLight Load® architecture provides the same high-efficiency and ultra-fast transient response as the Hyper Speed Control™ architecture under the medium to heavy loads, but also maintains high efficiency under light load conditions by transitioning to variable frequency, discontinuous-mode operation.

The MIC28304 offers a full suite of protection features to ensure protection of the IC during fault conditions. These include under-voltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, foldback current limit, “hiccup” mode short-circuit protection and thermal shutdown.

Ordering Information
Part Number Switching Freq. Features Package Temperature Range Lead Finish
MIC28304-1YMP 200kHz - 600kHz HyperLight Load 64-pin 12mm x 12mm QFN -40°C to +125°C Pb-Free
MIC28304-2YMP 200kHz - 600kHz Hyper Speed Control 64-pin 12mm x 12mm QFN -40°C to +125°C Pb-Free

* Please contact factory for pricing and availability.

To view the Portable Document Format files (PDFs) on this site, download a free Acrobat Reader. The free Adobe Acrobat Reader allows you to view, navigate and print PDF files across many different platforms. If you wish to download a copy of the free Adobe Acrobat Reader please click on the